Home   |    Company   |    Contact Us   |    Harrismachinetools.com       
HS21

Spindle Bore: 210 mm (8.26")
Max Swing Over Bed: 840 mm (33")
Max Swing Over Carriage: 530 mm (20.86")
Height of Center: 420 mm (16.5")
Max Work Piece Length: 3000 mm (118.1") / 4000 mm (157.4")
Max Turning Length: 2750 mm (108.26") / 3750 mm (147.6")
Max Work Piece Load: 3000 kg (6600 lbs.)
Bed Width: 600 mm (23.6")
Spindle Nose / Taper Hole: C15
Spindle Speeds: (12 steps, manual) 45 - 572 rpm
Max Transverse Travel (X): 450 mm (17.7")
Max Longitudinal Travel (Z): 3000 mm (118.1") / 4000 mm (157.4")
Main Motor Power: 9 / 11 kW (12 / 15 hp)
Power Tool Post: 4 stations
Tailstock Sleeve Travel: 300 mm (11.8")
Tailstock Sleeve Diameter: 100 mm (3.93")
Tailstock Sleeve Taper: MT 6
Rapid Traverse (X, Z): 4000 mm/min (157 ipm)
Turning Thread Range: 0.001 - 500 mm (0.000039" - 19.68")
Min Feed Unit: 0.001 mm (0.000039")
Cooling Pump Power: 0.09 kW (0.12 hp)
Cooling Pump Capacity: 20 L/min (5.28 gpm)
Ball Screw Pitch (X / Z): 6 mm / 12 mm
Servo Speed Reduction Ratio for X: 1
Servo Speed Reduction Ratio for Z: 1

Machine Accuracies
Dimensional Accuracy: IT6
Cylindrical Surface Finishing Roughness: Ral 0.6
Finishing Cylindricality: 0.030 mm / 500 mm
Flatness Finishing: 0.030 mm / 400 mm
Pitch Precision: 0.010 mm / 50 mm
Positioning Accuracy: X
Repeatability: X